BMW Tie Rod Linkages
Boot Kit
Boot Kit
Rear Lower Control Arm
No results found for "Tie Rod Linkage, Tie Rod". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
Can You Replace a Tie Rod Linkage Yourself?
Replacing a tie rod linkage can feel overwhelming, but it’s doable for confident DIYers with the right tools. Worn or loose tie rods affect steering and can cause uneven tire wear, making this a repair worth learning if you’re mechanically inclined.
Installing a Tie Rod Linkage in Your BMW 3 Series
1. Lift the Vehicle and Remove the Wheel
Raise your BMW 330i with a jack and secure it with jack stands to remove the front wheel.
2. Loosen the Jam Nut
Locate the outer tie rod, then back off the jam nut connecting it to the inner rod.
3. Remove the Cotter Pin and Castle Nut
Detach the tie rod from the steering knuckle by removing the cotter pin and castle nut.
4. Use a Separator Tool
A tie rod puller helps release the joint cleanly without damaging nearby components.
5. Count the Turns
Unscrew the old tie rod, counting the turns so the new one aligns similarly.
6. Install and Secure
Thread in the new tie rod, match the turn count, and tighten the jam nut.
7. Reconnect and Torque
Reattach the castle nut to the knuckle, torque it properly, and insert a new cotter pin.
8. Reinstall and Align
Replace the wheel and schedule a professional alignment.
If your tie rod is worn, your control arms might be next. Order genuine parts from Shop BMW Auto Parts Warehouse or contact us for expert help.